BIOSメニュー画面からの、TFTPによるFortiOSのインストール手順を教えてください
下記の手順にて実施ください。
※この作業により、設定が初期化されます。
必要に応じてバックアップの取得を事前に実施ください。
作業前に、機器本体のコンソールポートにコンソールケーブルを接続しておきます。
****************
機器電源投入後(もしくは再起動後)、以下のメッセージが表示されている間に任意のキーを押下します。
Press any key to display configuration menu...
..
****************
コンフィグメニューの表示は、FortiGate 機種によって異なります。
以下、コンフィグメニュー1、2をご参照ください。
【コンフィグメニュー1】
[G]: Get firmware image from TFTP server.
[F]: Format boot device.
[B]: Boot with backup firmware and set as default.
[I]: Configuration and information.
[Q]: Quit menu and continue to boot with default firmware.
[H]: Display this list of options.
Enter Selection [G]:
Enter G,F,B,I,Q,or H: 【「G」キーを押下します】
Please connect TFTP server to Ethernet port "xx". 【※TFTPサーバを"xx"で指定されたポートに接続します】
Enter TFTP server address [192.168.1.168]: 【※TFTPサーバのIPアドレスを入力します】
Enter local address [192.168.1.188]: 【※Fortigateに一時的に割り当てるIPアドレスを入力します】
Enter firmware image file name [image.out]: 【※事前に準備したOSファイル名を指定します】
Save as Default firmware/Backup firmware/Run image without saving:[D/B/R]? 【「D」キーを押下します】
###################
【コンフィグメニュー2】
[C]: Configure TFTP parameters.
[R]: Review TFTP parameters.
[T]: Initiate TFTP firmware transfer.
[F]: Format boot device.
[I]: System information.
[B]: Boot with backup firmware and set as default.
[Q]: Quit menu and continue to boot.
[H]: Display this list of options.
Enter C,R,T,F,I,B,Q,or H: 【「C」キーを押下します】
以下のメニューから、転送設定を行います。
[P]: Set firmware download port. ①
[D]: Set DHCP mode. ②
[I]: Set local IP address. ③
[S]: Set local subnet mask. ④
[G]: Set local gateway. ⑤
[V]: Set local VLAN ID. ⑥
[T]: Set remote TFTP server IP address. ⑦
[F]: Set firmware file name. ⑧
[E]: Reset TFTP parameters to factory defaults.
[R]: Review TFTP parameters. ⑨
[N]: Diagnose networking(ping).
[Q]: Quit this menu. ⑩
[H]: Display this list of options.
Enter P,D,I,S,G,V,T,F,E,R,N,Q,or H:
任意のキーを入力して、それぞれの設定を行ってください。
① TFTP サーバと接続する任意のポートを指定します。
② DHCP mode の有効/無効を設定します。(デフォルトは無効)
有効にした場合、③④⑤の設定は不要です。
③ Fortinet 機器の IP アドレスを入力します。
④ Fortinet 機器の サブネットマスクを入力します。
⑤ Fortinet 機器の TFTP サーバが同一セグメントにない場合、
Fortinet 機器のゲートウェイを入力します。
⑥ VLAN ID の設定が必要な場合は入力します。
⑦ TFTP サーバの IP アドレスを入力します。
⑧ 転送するハードウェア診断ツールのイメージファイルを入力します。
⑨ 設定した TFTP パラメータの内容が確認出来ます。
⑩ コンフィグメニューへ戻ります。
以下のメニューから、「Q」キーを押下して、コンフィグメニューに戻ります。
Enter P,D,I,S,G,V,T,F,E,R,N,Q,or H: 【「Q」キーを押下します】
コンフィグメニューから、「T」キーを押下して、
FortiOSのイメージファイルをTFTPサーバから転送します。
[C]: Configure TFTP parameters.
[R]: Review TFTP parameters.
[T]: Initiate TFTP firmware transfer.
[F]: Format boot device.
[I]: System information.
[B]: Boot with backup firmware and set as default.
[Q]: Quit menu and continue to boot.
[H]: Display this list of options.
Enter C,R,T,F,I,B,Q,or H: 【「T」キーを押下します】
connect TFTP server to Ethernet port "xx". 【※TFTPサーバを"xx"で指定されたポートに接続します】
######################################################################
Image Received.
Checking image... OK
Save as Default firmware/Backup firmware/Run image without saving:[D/B/R]? 【「D」キーを押下します】
Programming the boot device now.
OSインストール完了後は工場出荷時状態の設定で稼働しますので、
適宜コンフィグのリストアなどを実施ください。
--------------------------------------------------------------------------------
製品情報トップページはこちら
製品導入前に関するお問い合わせはネットワールド問い合わせ窓口 までお問い合わせ下さい。
製品導入後に関するお問い合わせはネットワールド保守窓口 までお問い合わせ下さい。